All components are replaceable, making them easy to change when they are worn.
Durability
Environmentally Friendly
FELCO uses renewable energy in production and recycles virtually all its waste. This responsible approach is in harmony with FELCO’s principle of replaceable components and demonstrates the focus on durability and longevity that have always been part of the company’s DNA.
Maintainance
The videos below do not necessarily show the chosen tool. But the handling is the same.
It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.
It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.
After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.
It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!
Spare Parts Replacement
The videos below do not necessarily show the chosen tool. But the handling is the same.
When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.
When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut.
If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.
When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
